无人机模拟训练系统中的实时飞行仿真

为了降低无人机的试飞成本,提高操纵手的技能,设计了一种模拟训练系统。介绍了该模拟训练系统的特点和构成,着重对系统中实时飞行仿真的各模块设计方法进行了研究。在DOS操作系统中用C语言实现飞行仿真软件,并讨论了软件实现中的模态切换等关键问题。通过飞行剖面仿真实验,证明该仿真系统可靠性高、实时性好。     

基于全解耦奇偶方程的动态系统执行器故障检测与识别

给出了基于全解耦奇偶方程的动态系统执行器故障的检测与识别方法。讨论了全解耦奇偶向量的产生方法,给出了全解耦奇偶向量的存在条件,并结合卡尔曼滤波方法得到了故障模型参数的估计方法。最后给出了仿真实例。结果表明,全解耦奇偶方程方法能估计出动态系统执行器故障模型。     

激波在狭缝中绕射过程研究

针对固体火箭发动机药柱存在裂纹的情况，对运动激波在狭缝中绕射传播的非定常流场进行了计算，得到了清晰的流场变化图谱，从流场图中可分辨出激波在狭缝中的传播过程。对不同深宽比的狭缝进行研究，发现流场结构存在明显差别，在深宽比较小时狭缝内压力波振荡较小，当深宽比超过一定值时狭缝内的压力波产生剧烈振荡。研究结果表明，该方法可很好地描述激波在狭缝中的传播过程。     

基于RBF网络的惯导系统初始对准

建立了惯导系统（ＩＮＳ）初始对准的线性和非线性误差模型。分析了径向基函数（ＲＢＦ）网络的结构和工作原理。研究了ＲＢＦ网代替初始对准中的卡尔曼滤波器的实现方法。通过仿真表明，用神经网络进行初始对准，既可获得与卡尔曼滤波相同的对准精度，又提高了系统的实时性。     

VentureStar… reaping the benefits of the X-33 program

Major X-33 flight hardware has been delivered, and assembly of the vehicle is well underway in anticipation of its flight test program commencing in the summer of 1999. Attention has now turned to the operational VentureStar^TM, the first single-stage-to-orbit (SSTO) reusable launch vehicle. Activities are grouped under two broad categories: (1) vehicle development and (2) market/business planning, each of which is discussed. The mission concept is presented for direct payload delivery to the International Space Station and to low Earth orbit, as well as payload delivery with an upper stage to Geosynchronous Transfer Orbit (GTO) and other high energy orbits. System requirements include flight segment and ground segment. Vehicle system sizing and design status is provided including the application of X-33 traceability and lessons learned. Technology applications to the VentureStar^TM are described including the structure, propellant tanks, thermal protection system, aerodynamics, subsystems, payload bay and propulsion. Developing a market driven low cost launch services system for the 21st Century requires traditional and non-traditional ways of being able to forecast the evolution of the potential market. The challenge is balancing both the technical and financial assumptions of the market. This involves the need to provide a capability to meet market segments that in some cases are very speculative, while at the same time providing the financial community with a credible revenue stream. Furthermore, the market derived requirements need to be assessed so as not to impose unnecessary requirements on the vehicle design that add unreasonable cost to the development of the system, yet provides the right capabilities for new markets that could be triggered by dramatically lower space transportation prices.     

数值模拟高超音速化学非平衡流的隐式格式

针对高超音速化学非平衡流提出了两种隐式格式.一种是近似因子分解算法对角化形式在隐式TVD(全变差递减)格式上的推广,另一种可视为隐式TVD格式的LU分解形式.数值试验表明,本文给出的算法保持了TVD格式的高分辨率特性,同时计算量大大减少,是高超音速化学非平衡流数值模拟的有效方法.     

扭叶片型面在线检测的研究

以汽轮机700mm扭叶片为对象,在XK5040数控机床上,进行了型面误差在线检测的研究。     

齿轮测量中心测头数据采集系统

提出了齿轮测量中心电感测头的新型数据采集系统,包括以集成开关构成的新型相敏检波器和以单片机为核心的数据采集系统,可以应用于各种电感信号的处理,具有较强的通用性。     

Zonal mean temperature, pressure, zonal wind and geopotential height as functions of latitude

The new zonal mean COSPAR International Reference Atmosphere (CIRA-86) of temperature, zonal wind, and geopotential/geometric height is presented. This data can be used as a function of altitude or pressure and has nearly pole-to-pole coverage (80°S-80°N) extending from the ground to approximately 120 km. Data sources and methods of computation are described; in general, hydrostatic and thermal wind balance are maintained at all levels and latitudes. As shown by a series of cross sectional plots, the new CIRA accurately reproduces most of the characteristic features of the atmosphere such as the equatorial wind and the general structure of the tropopause, stratopause, and mesopause.     

柔性冗余度机器人动力学规划

考虑机器人的结构柔性,研究了利用冗余度机器人的"自运动"同时进行振动抑制和机器人关节力矩优化的方法.研究表明,在进行柔性冗余度机器人的动力学优化时,应从振动和关节力矩两方面考虑.若单考虑振动抑制,机器人的关节力矩将可能无穷增大,使算法失效;若单考虑关节力矩优化,机器人臂末端的振动将有可能发散.这里给出的算法同时考虑了这两方面.不同于冗余度机器人传统的优化方法--机器人雅克比矩阵的零空间优化法,这里从最优控制论的方法着手,研究了考虑结构变形的冗余度机器人利用其自身的"自运动"进行振动抑制和关节力矩优化.仿真结果,证明了这种优化方法是完全可行的.